Software Guide

Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide 240
Figure 7-18 QoS Summary
This screen shows the total, minimum and maximum bandwidth allocated per BSU/End Point A, and the minimum and
maximum bandwidth allocated for each SU/End Point B registered with the BSU/End Point A respectively.
7.4 Active VLAN
: Active VLAN is applicable only to a device in SU (Bridge) mode.
The Active VLAN page enables you to identify the VLAN Configuration mode applied on a device in SU mode.
To view active VLAN applied on the device in SU mode, navigate to MONITOR > Active VLAN. The Active VLAN page
appears:
Figure 7-19 Active VLAN
The Active VLAN Config parameter helps you to identify the current VLAN configuration applied on the device in SU mode.

Local: VLAN configuration is done locally from the device.

Remote: VLAN configuration is done through RADIUS Server.