Software Guide

Management
Tsunami
®
800 & 8000 Series - Software Management Guide 201
6.2.4.2 Upgrade Configuration via TFTP
To upgrade the configuration files by using TFTP Server, do the following:
1. Navigate to MANAGEMENT > File Management > Update Configuration > TFTP.
Figure 6-8 Upgrade Binary Configuration via TFTP
2. You can update the device with three types of configuration files: Binary, Text Based and Config Profile. To update the
device with Binary Configuration file, select Binary Config.

Based on the IP mode configure either IPv4 or IPv6 address as TFTP Server address.

Enter the name of the Binary file (including the file extension) that has to be downloaded onto the device in the
File Name box.
3. To update the device with Text Based Configuration files, select Text Based Config.

Based on the IP mode configure either IPv4 or IPv6 address as TFTP Server address.

Enter the name of the Text Based file (including the file extension) that has to be downloaded onto the device in
the File Name box.
Figure 6-9 Upgrade Text Based Configuration via TFTP