Manualshelf

Software Guide

ManualsBrandsProxim Wireless ManualsElectronics802.11 a/b/g/n Mini-PCI module
11121314151617181920
Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 186
Figure 5-108 DHCP Pool Table Add Entry
Enter the pool details and click Add. The entry will be updated in the DHCP pool table.
To apply the configured changes, click COMMIT.
5.11.2 DHCP Server
If DHCP Server is enabled, it picks automatically the IP addresses from the specific interface address pool and assigns them to
the respective DHCP clients.
DHCP Server feature is applicable to both Bridge and Routing Mode. In Routing mode, DHCP Server can be configured for
each interface (Ethernet and Wireless) separately. Unless the DHCP Server functionality is enabled for an interface, the DHCP
Server does not respond to the DHCP requests received on that interface.
To configure the DHCP server parameters, navigate to ADVANCED CONFIGURATION > DHCP > DHCP Server > Interface.
The DHCP Server screen appears:
Figure 5-109 DHCP Server (Bridge Mode)