Software Guide

Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide 270
Using the rlt command options tabulated below, you run the radio link test tool through Web Console.
Signal Statistics
Signal Signal measured at the radio port
Noise Noise detected at the radio port
SNR Signal to Noise Ratio (dB)
Options Description
-t Test duration (Default: 60 seconds)
-i Periodic report display interval (Default: 0 - disabled)
-s Packet size (Default: 1500 bytes)
-o Ignore timeout during test (Default: do not ignore)
Traffic Direction
-d Downlink throughput test with specified traffic rate in K bps (Default: Unlimited)
-u Uplink throughput test with specified traffic rate in K bps (Default: Unlimited)
No option Default: Bi-Directional test with unlimited rate
Miscellaneous
-h, --help Tool usage
-v, --version Tool version number
-V Verbose mode (Enables detailed statistics display)
v w x y z { | } ~   }   }    ~     w x  x    x ~ }      x         x       }    }       w  w x y z  |  x   }  x } ~   }   }           
   x    }   
Parameter Description