Software Guide

Device Initialization
Tsunami
®
800 & 8000 Series - Software Management Guide 36
3.2.2 COMMIT
COMMIT operation is used to apply the configuration changes onto the device. When changes are made to the
configuration parameters of the device, the changes will not take effect, until COMMIT is clicked. Some parameters may
require system reboot for the changes to take effect. On clicking COMMIT, the system evaluates all the configuration
dependencies and displays the configuration status.
Before applying commit, the system displays a confirmation message, as shown in the following figure:
Figure 3-7 Commit
Click OK, to confirm the changes.
On successful COMMIT operation, the following screen appears:
Figure 3-8 Commit Status
If the configured parameters requires reboot, on committing the following screen appears.
Figure 3-9 Commit Status with Reboot Message