Software Guide

Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 144
Figure 5-67 QoS PIR Protocol ID
c. Enter the details and click Add. For deleting an entry, click Delete for the corresponding entry in PIR Details
screen.
5.6.2.1.3 Adding TCP/UDP Source Port Add Entry
a. Navigate to ADVANCED CONFIGURATION > QoS > PIR List. Click Details. The QoS PIR Edit Entry screen
appears.
b. Navigate to TCP/UDP Source Port Entries tab and then click Add to add a new entry. The following screen
appears.
Figure 5-68 QoS PIR TCP/UDP Source Port Add Entry
c. All the Entries present in the PIR TCP/UDP Port Entries are displayed in the TCP/UDP Port Entry Table. Select the
appropriate radio button and click Add. When an entry is added for the specific PIR, the entry gets displayed in
the existing TCP/UDP Port Entries table. For deleting an entry, click Delete for the corresponding entry in the PIR
Details page.
5.6.2.1.4 Adding TCP/UDP Destination Port Add Entry
a. Navigate to ADVANCED CONFIGURATION > QoS > PIR List. Click Details. The QoS PIR Edit Entry screen
appears.
b. Navigate to TCP/UDP Destination Port Entries tab and then click Add to add a new entry. The following screen
appears.