Software Guide

Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 137
Figure 5-59 QoS PIR IP Address Entries
To Add a New PIR IP Address Entry,
a. Navigate to ADVANCED CONFIGURATION > QoS > PIR List > IP Address Entries. The QoS PIR IP Address
Entries screen appears
b. Click Add on the QoS PIR IP Address Entries screen to add a new entry. The following screen appears for
configuring the IP Address Entry Details.
Figure 5-60 QoS PIR IP Address Add Entry
c. Provide the IP Address, Subnet Mask, Comment, Entry Status details and click Add. Comment field can be used by
the user to identify when this particular entry is referred in PIR Rule or QoS Class.
5.6.2.0.3 QoS PIR TCP/UDP Port Configuration
1. Navigate to ADVANCED CONFIGURATION > QoS > PIR List > TCP/UDP Port Entries. The QoS PIR TCP/UDP Port
Entries screen appears. Three predefined TCP/UDP Port Entries are displayed. You can configure a maximum of 256
entries. Start Port, End Port combination should be unique. This TCP/UDP Port entry can be referred in the PIR Rule’s
Source or Destination TCP/UDP Port Classification. TCP/UDP Port Entry referred by any PIR rule can not be deleted.
2. Click OK.