User's Manual

Advanced Configuration
Adding a New Service Flow (SFC):
a. Click Add to add new entry. The following screen appears for configuring the New PIR Entry.
Figure 5-43 QoS Service Flow Add Entry
2. Specify details for the Service Flow Name, Scheduler Type, Traffic Direction, MIR, CIR, Max Latency, Tolerable Jitter,
Traffic Priority, Max Messages in Burst and Entry Status.
3. Click Add .
Parameter Description
Service Flow Name Specifies the Name of the Service Flow. It can be of length 1-32 characters. T
: Special characters - = \ \"\ ' ? \\ / space are not allowed.
Scheduler Type Specifies the Scheduler methods to be used. Scheduler type supports BE (Best Effort), RTPS
(Real-Time Polling Service).
Traffic Direction Specifies the Direction (Downlink or Uplink) of the traffic in which the configuration has to
be matched.
MIR (Maximum Specifies the maximum bandwidth allowed for this Service Flow. This value ranges from 8
Information Rate) kbps to maximum value specified in the license file.
CIR (Committed Specifies the reserved bandwidth allowed for this Service Flow. This value ranges from 0 to
Information Rate) maximum value specified in the license file.
Max Latency Specifies the Latency value. This value ranges from 5 to 100 ms.
Tolerable Jitter Specifies the Jitter value. This value ranges from 0 to 100 ms.
Traffic Priority Specifies the priority of the Service flow when multiple Service flows are assigned to single
QoS Class. This value ranges from 0 to 7.
Tsunami® 8100 Series - Software Management Guide 91