User's Manual

Advanced Configuration
Sample Security Profile Configuration
End Point A End Point B
Profile Name WORP Security WORP Security
Encryption Type AES-CCM AES-CCM
Key 1234567890abcdef1234567890abcdef 1234567890abcdef1234567890abcdef
(32 Hexadecimal digits) (32 Hexadecimal digits)
or or
publicpublic1234 publicpublic1234
(16 ASCII Characters) (16 ASCII Characters)
Entry Status Enable Enable
Network Secret public public
5.5.1.2 Editing an existing Security Profile
To edit the parameters of the existing security profiles, click Edit icon in the Wireless Security Configuration screen.
The Wireless Security Edit Row screen appears:
Figure 5-22 Wireless Security Edit Row
Edit the required parameters and click OK and then COMMIT.
5.5.2 RADIUS
:Applicable only to a BSU and End Point A devices.
The RADIUS tab allows you to configure a RADIUS authentication server on a BSU/End Point A that remotely authenticates a SU or
an End Point B while registering with a BSU or an End Point A respectively. These servers are also used to configure few features
(VLAN and QoS) on a SU.
A RADIUS server profile consists of a Primary and a Secondary RADIUS server that can act as Authentication servers.
Configuration of Secondary Authentication Server is optional. The RADIUS server is applicable only when it is enabled in the
WORP Configuration page.
Tsunami® 8100 Series - Software Management Guide 71