User's Manual

Advanced Configuration
Figure 5-19 An Example - SNR Information
These SNR values vary depending on your device. For device specific SNR information, see SNR Information.
5.5 Security
5.5.1 Wireless Security
The Wireless Security feature helps to configure security mechanisms to secure the communication link between a BSU and a SU,
and a link between End Point A and End Point B. By default, a security profile (WORP Security) is preconfigured with the default
configuration for WORP security. Altogether, device allows to create 8 security profiles as required. Even though 8 security profiles
can be created, only one security profile can be active at a time. The active security profile is configured as part of the WORP
property Security Profile Name. For a security profile to be active, it must be enabled. Refer to Wireless Outdoor Router Protocol
(WORP) for more details.
Tsunami® 8100 Series - Software Management Guide 68