Manualshelf

User's Manual

ManualsBrandsProxim Wireless ManualsElectronicsTsunami 8000 Point-to-Point and Point-to-multipoint Product
51525354555657585960
Advanced Configuration
Parameter Descriptions
Regulatory Frequency Max EIRP (dBm)
Domain (MHz)
PTP Mode PTMP Mode
India 5825 - 5875 36 36
Brazil 5470 - 5725 30 30
5725 - 5850 Unlimited (100) 32 + 2/3(antenna
gain)
Australia 5470 - 5600 30 (20 and 40 MHz) 30 (20 and 40 MHz)
27 (10 MHz) 27 (10 MHz)
24 (5 MHz) 24 (5 MHz)
5650 - 5725 30 (20 and 40 MHz) 30 (20 and 40 MHz)
27 (10 MHz) 27 (10 MHz)
24 (5 MHz) 24 (5 MHz)
5725 - 5850 36 36
:
• The maximum EIRP is not defined in the above table then it is set to 100
(unlimited EIRP).
• Maximum EIRP criterion is enforced only when ATPC is enabled.
Active TPC A read-only parameter which displays the TPC applied by the device to adjust the transmit
power, when ATPC is enabled.
: In case of BSU, the Active TPC refers to the TPC applied to the broadcast
packets. To view Active TPC of each link, refer to SU / End Point B Link
Statistics.
Active EIRP A read-only parameter which displays the current EIRP that a radio antenna radiates.
Active Power A read-only parameter which displays the current power radiated by the radio.
Tsunami® 8100 Series - Software Management Guide 54