User's Manual

Advanced Configuration
Tabulated below is the table which explains Advanced Ethernet parameters and the method to configure the configurable
parameter(s):
Parameter Description
Auto Shutdown This parameter facilitates LACP capable Ethernet switches to use two Quick Bridge links to
achieve higher throughput and redundancy. By default, it is Disabled.
If Auto Shutdown is enabled on the Ethernet Interface, then the Ethernet port will be
automatically disabled, when the wireless link goes down. It will be automatically enabled once
the wireless link is up again.
: This feature works only if STP/LACP Frames is set to passthru (See ADVANCED
CONFIGURATION > Filtering)
Tsunami® Quick Bridge devices that are part of LACP link cannot be managed through the
switches, so it is recommended to use the second ethernet port for management.
After configuring the required parameters, click OK and then COMMIT.
5.4 Wireless
The Wireless tab allows you to configure the wireless properties for the radio interface of the device.
5.4.1 Wireless Outdoor Router Protocol (WORP)
WORP is protocol, designed by Proxim that protects the network from packet collisions and solves the hidden node problem to
transmit the data in an optimal way.
To configure the WORP properties, navigate to ADVANCED CONFIGURATION > Wireless > Interface1 > WORP. The
WORP Configuration screen appears:
Tsunami® 8100 Series - Software Management Guide 44