Manualshelf

User's Manual

ManualsBrandsProxim Wireless ManualsElectronicsTsunami 8000 Point-to-Point and Point-to-multipoint Product
31323334353637383940
Advanced Configuration
Parameter Description
Secondary IP Address Represents the IP address of the Secondary DNS Server.
When the address type is set to Dynamic, this parameter is read-only and displays the
DNS Secondary IP Address obtained from the DHCP server. If the address type is set to
Static then you will have to manually enter the secondary IP Address.
After configuring the required parameters, click OK, COMMIT and then REBOOT.
5.2.2 IP Configuration (Routing Mode)
To configure the IP parameters of the device when operating in Routing mode, navigate to ADVANCED CONFIGURATION >
Network. The IP Configuration screen appears:
Figure 5-5 IP Configuration (Routing Mode)
Tabulated below is the table which explains the method to configure IP parameters in Routing mode:
Parameter Description
Ethernet
Please note that the number of Ethernet interfaces depend on your device.
Tsunami® 8100 Series - Software Management Guide 38