Manualshelf

User's Manual

ManualsBrandsProxim Wireless ManualsElectronicsTsunami 8000 Point-to-Point and Point-to-multipoint Product
31323334353637383940
Advanced Configuration
Figure 5-2 Bridge Mode
If the network mode of the device is configured in Routing mode, then the following screen appears:
Figure 5-3 Routing Mode
5.2.1 IP Configuration (Bridge Mode)
To configure the IP parameters of the device when operating in Bridge mode, navigate to ADVANCED CONFIGURATION >
Network > IP Configuration. The following IP Configuration screen appears:
Figure 5-4 IP Configuration (Bridge Mode)
Tabulated below is the table which explains the method to configure IP parameters in Bridge mode:
Parameter Description
Ethernet
Please note that the number of Ethernet interfaces depend on your device.
Tsunami® 8100 Series - Software Management Guide 36