User's Manual

Device Initialization
Parameter BSU Mode/ SU Mode/
End Point A End Point B
RADIUS Profile Enabled with profile name Not Applicable
“Default Radius”
MAC Authentication Disabled Not Applicable
RADIUS MAC Authentication Disabled Not Applicable
Channel Bandwidth 20 MHz 20 MHz
Active Channel Selection Disabled Enabled
ATPC Enabled Enabled
Network Secret Public Public
QoS Unlimited BE Not Applicable
Management VLAN Disabled Disabled
VLAN Status Disabled Disabled
VLAN Mode (Ethernet) Transparent Transparent
Global Filtering Disabled Disabled
DHCP Server Disabled Disabled
STP/LACP Enabled (configured as Enabled (configured as
“passthru”) “passthru”)
DHCP Relay Disabled Disabled
IGMP Snooping Disabled Disabled
RIP Disabled Disabled
NAT Disabled Disabled
PPPoE Client Not Applicable Disabled in SU Mode
Not Applicable in End Point B
HTTP Management Interface Enabled Enabled
Telnet Management Interface Enabled Enabled
SNMP Management Interface Enabled with SNMPv1-v2c Enabled with SNMPv1-v2c
Simple Network Time Protocol (SNTP) Disabled Disabled
Management Access Control Disabled Disabled
Event Log Priority Notice Notice
SysLog Status Enabled Enabled
SysLog Priority Critical Critical
Tsunami® 8100 Series - Software Management Guide 28