User's Manual

Device Initialization
Figure 3-3 Login Screen
Based on the access credentials, two types of users can access the device. They are,
1. Administrator User: The Administrator user administers the entire device. This user type has the write access to all
the features of the device and also has the privilege to change his or her own password and that of the Monitor user
(the other user type). To change the password, refer to Services.
2. Monitor User - The Monitor user has only view access to all the features of the device. This user is restricted from the
following privileges:
• Change the device functionality
• Change his or her own password
• Run any of the test tools like Link Test, Wireless Site Survey and so on. However, the user can view the logs and
statistics of the test tools.
The Monitor user is given the privilege to retrieve event logs and temperature logs for debugging.
To logon to the device,
1. Type a valid user name in the User Name box. The user name is admin for the Administrator user and monitor for
the Monitor user.
2. Type the password in the Password box. By default, the password is public for both the Administrator user and the
Monitor user.
:
• By default the password is public. For security reasons, it is recommended to change the password after your first
logon to the device.
• Depending on the settings made during the device initialization, the IP address may be either a dynamic IP address
assigned by a network DHCP server or a static IP address which is manually configured. Refer to ScanTool for
information on how to determine the device’s IP address and manually configure a new IP address.
• If the connection is slow or unable to connect, use the Internet Explorer Tools option to ensure that you are not
using a proxy server for the connection.
• If you are unable to log on to the configuration pages by using default user name and password, please check
with the administrator or follow Forced Reload procedures.
• If using Internet Explorer, and you enter wrong password consecutively for three times, the HTTP session will get
disconnected. If case of other browsers, the login screen will reset until you enter correct password.
• In the Internet Explorer, to get best results, click on Tools > Internet Options > General. Click Settings in the
Browsing History and select “Every visit to the webpage”.
Tsunami® 8100 Series - Software Management Guide 24