User's Manual

Device Initialization
3.1.3 Modifying the IP Address of the Device using ScanTool
To modify the IP address of a device using ScanTool, select the device from the scan list and click Change. A Change screen
appears as shown in the following figure. The system automatically populates the MAC Address, System Name, TFTP
Server IP Address and Image File Name of the device, which are read-only.
Figure 3-2 Modifying Device’s IP Address
1. Select the IP Address Type as either static or dynamic.
• Static: When set to static, the IP address of the device is changed manually.
• Dynamic: When set to dynamic, the IP address is dynamically generated by the DHCP server.
2. Type the appropriate IP Address, Subnet Mask, and the Gateway IP Address parameters.
3. Enter the SNMP Read/Write password in the Read/Write Password box. By default, it is public.
4. Click OK to save the details. The device automatically reboots.
To log on to the Web Interface, click Web Configuration.
The user is then prompted to enter its username and password. For more information on how to login, please see Logging onto
the Web Interface.
3.2 Logging onto the Web Interface
Once the device is connected to your network, use a web browser to configure, manage and monitor the device. Enter the default
IP address of the device (For example, http://169.254.128.132) in the address bar or access the Web Interface using ScanTool (see
Initialization).
You are now prompted to enter your username and password.
Tsunami® 8100 Series - Software Management Guide 23