User's Manual

C
Frequency Domains and Channels
Introduction
The Tsunami® Point-to-point and Point-to-multipoint products are available in two SKUs: United States (US) and rest of the World
(WD) markets. Depending on the SKU, the device is hard programmed at factory to that Regulatory domain.
Regulatory
domain controls the list of frequency domains that are available in that SKU. Further each frequency domain will define the country
specific regulatory rules and frequency bands. This is a configurable option. The following table lists all the Tsunami® products with
their respective Frequency domains and SKUs supported.
Product Supported Frequency Band Supported SKUs
Tsunami® MP-8100-BSU 2.3 - 2.5 GHz and 4.9 - 6.0 GHz US, World
Tsunami® MP-8100-SUA 2.3 - 2.5 GHz and 4.9 - 6.0 GHz US, World
Tsunami® MP-8150-SUR 4.9 - 6.0 GHz US, World
Tsunami® MP-8150-CPE 5.3 - 6.1 GHz US, World
Tsunami® MP-8160-BSU 5.9 - 6.4 GHz World
Tsunami® MP-8160-SUA 5.9 - 6.4 GHz World
Tsunami® MP-8160-CPE 5.9 - 6.4 GHz World
Tsunami® QB-8100-EPA 2.3 - 2.5 GHz and 4.9 - 6.0 GHz US, World
Tsunami® QB-8150-EPR 4.9 - 6.0 GHz US, World
Tsunami® QB-8150-LNK-12/50 5.3 - 6.1 GHz US, World
The frequency domains can be easily configured using the Web Interface as it is a drop down list with all the available
domains. When the device is configured with CLI or SNMP, care has to be taken to set the domains using a predefined ENUM
value. Below is the list of all available frequency domains in each SKU with their corresponding ENUM value in the braces:
Frequency Domain ENUM Value
US SKU
United States 5.8 GHz 2
United States 2.4 GHz 3
United States2 (5.3 to 5.8 GHz) 22
World SKU
United States 5 GHz 1
World 5 GHz 4
World 4.9 GHz 5
World 2.4 GHz 6
Tsunami® 8100 Series - Software Management Guide 223