User's Manual

B
Parameters Requiring Reboot
Tabulated below are the device parameters that require reboot for the changes to take effect:
Parameter(s) Web Page(s) Applicable Device Mode*
System Configuration
Radio Mode BASIC CONFIGURATION All
ADVANCED CONFIGURATION -> System
Frequency Domain BASIC CONFIGURATION All
ADVANCED CONFIGURATION -> System
Network Mode ADVANCED CONFIGURATION -> System All
Frequency Filter ADVANCED CONFIGURATION -> System All
Lower Edge
Frequency Filter ADVANCED CONFIGURATION -> System All
Upper Edge
IP Configuration (Bridge Mode)
Ethernet
Default Gateway IP
Address
DNS
BASIC CONFIGURATION
ADVANCED CONFIGURATION -> Network -> IP Configuration
All
All
All
IP Configuration (Routing Mode)
Ethernet
Wireless
Wireless (With
PPPoE)
Default Gateway IP
Address
DNS (Primary and
Secondary Address)
All
All
SU Mode
BASIC CONFIGURATION
ADVANCED CONFIGURATION -> Network -> IP Configuration
All
All
NAT
Status ADVANCED CONFIGURATION -> Network -> NAT SU Mode / End Mode B mode
Dynamic Start Port ADVANCED CONFIGURATION -> Network -> NAT SU Mode / End Mode B mode
Dynamic End Port ADVANCED CONFIGURATION -> Network -> NAT SU Mode / End Mode B mode
PPPoE
Status ADVANCED CONFIGURATION -> Network -> PPPoE Client SU Mode
Tsunami® 8100 Series - Software Management Guide 220