User's Manual

Monitor
7.10.4 Console Commands
The Console Commands feature helps Proxim’s Technical Support team to debug field issues.
7.11 SNMP v3 Statistics
SNMP v3 statistics can be viewed only when SNMPv3 feature is enabled on the device. See SNMP.
To view the SNMPv3 Statistics, navigate to MONITOR > SNMPV3 Statistics. The following SNMP v3 Statistics screen
appears:
Figure 7-36 SNMP v3 Statistics
The following table lists the SNMP v3 parameters and their description
:

Parameter Description
Unsupported Sec This parameter specifies the total number of packets received by the SNMP engine, which
Levels were dropped because they requested a security level that was unknown to the SNMP
engine or otherwise unavailable.
Not In Time Windows This parameter specifies the total number of packets received by the SNMP engine which
were dropped because they appeared outside of the authoritative SNMP engine's window.
Unknown User Names This parameter specifies the total number of packets received by the SNMP engine which
were dropped because they correspond to an unknown user to the SNMP engine.
Unknown Engine IDs This parameter specifies the total number of packets received by the SNMP engine which
were dropped because they correspond an SNMP Engine ID that was unknown to the
SNMP engine.
Wrong Digests This parameter specifies the total number of packets received by the SNMP engine which
were dropped because they did not contain the expected digest value.
Decryption Errors This parameter specifies the total number of packets received by the SNMP engine which
were dropped because they could not be decrypted.
Tsunami® 8100 Series - Software Management Guide 204