User's Manual

Monitor
Figure 7-29 Temperature Log
After configuring the parameters, click OK.
To view the Temperature Log, click Show Temp Log.
To delete all the Temperature Logs, click Clear Temp Log.
Click Refresh, to get the updated Temperature Log.
7.10 Tools
7.10.1 Wireless Site Survey
: Applicable only to a device in SU or End Point B mode.
Wireless Site Survey is done by the SU or End Point B only. This feature scans all the available channels according to the
current Channel Bandwidth, and collects information about all BSUs or Endpoint A configured with the same network name
as
SUs or End Point B.
Figure 7-30 Wireless Site Survey - SU Mode
To initialize the survey process, click Start. This process list the details of all the available BSUs or End Point A. To stop the site survey
process, click Stop. Click Refresh, to get the updated Wireless Site Survey.
Tsunami® 8100 Series - Software Management Guide 198