User's Manual

Management and Monitoring Capabilities

A Network administrator can use the following interfaces to configure, manage and monitor the devices.

• Web Interface

• Command Line Interface

• Simple Network Management Protocol (SNMP)

•

ProximVision ES (PVES)

2.1 Web (HTTP/HTTPS) Interface

The Web interface (HTTP) provides easy access to configuration settings and network statistics from any computer on the

network. You can access the Web interface, through LAN (switch, hub and so on), the Internet, or with an Ethernet cable

connected directly to your computer’s Ethernet port.

HTTPS interface provides an HTTP connection over a Secure Socket Layer (SSL). HTTPS allows the user to access the device in

secure fashion using SSL over port 443. The device supports SSLv3 with a 128-bit encryption certificate maintained by the device

for secure communication between the device and the HTTP client. All communications are encrypted using the server and the

client-side certificate.

2.2 Command Line Interface

The Command Line Interface (CLI) is a text-based configuration utility that supports a set of keyboard commands and

parameters to configure, manage and monitor the device. You can enter the command statements composed of CLI

commands and their associated parameters. Commands can be issued from the keyboard for real-time control, or from scripts

that automate configuration. For example, when downloading a file, an administrator enters the download CLI Command

along with the IP Address, file name, and file type parameters.

2.2.1 HyperTerminal

You can access the CLI over a HyperTerminal serial connection. HyperTerminal is a program that connects to other

Computers, Telnet Sites, Bulletin Board Systems (BBS), Online Services, and Host Computers, by using either modem or a null

modem cable.

If you are using RS-232 cable, verify the following information in the HyperTerminal serial port setup:

Port COM1 (default)

Baud Rate 115200

Data 8-bit

Parity None

Stop 1-bit

Flow Content None

: If you are using Windows 7 then use Terminal Emulator program like Teraterm Pro for serial connection.

Tsunami® 8100 Series - Software Management Guide 19