User's Manual

Monitor
Parameter Description
In Errors Represents the number of inbound packets with errors and that are restricted from being
delivered.
Out Octets Represents the total number of octets transmitted out of the bridge, including the framing
characters.
Out Unicast Packets Represents the total number of packets requested by higher-level protocols to be
transmitted out of the bridge interface to a subnetwork-unicast address, including those
that were discarded or not sent.
Out Discards Represents the number of error-free outbound packets which are discarded to prevent
them from being transmitted. One possible reason for discarding such a packet could be to free
up buffer space.
Out Errors Represents the number of outbound packets that could not be transmitted because of
errors.
To view updated Bridge statistics, click Refresh.
To clear the Bridge statistics, click Clear.
7.4.2 Learn Table
Learn Table allows you to view all the MAC addresses that the device has learnt on all of its interfaces.
To view Learn Table statistics, navigate to MONITOR > Bridge > Learn Table. The Learn Table screen appears.
Figure 7-17 Learn Table
The Learn Table displays the MAC address of the learnt device, the bridge port number, aging timer for each device learnt on an
interface, and the local (DUT's local interfaces)/remote (learned entries through bridging) status of the learnt device.
To view updated learn table statistics, click Refresh.
To clear learn table statistics, click Clear.
Tsunami® 8100 Series - Software Management Guide 188