Manualshelf

User's Manual

ManualsBrandsProxim Wireless ManualsElectronicsTsunami 8000 Point-to-Point and Point-to-multipoint Product
181182183184185186187188189190
Monitor
7.3 Active VLAN
: This parameter is applicable only to a device in SU mode.
The Active VLAN page enables you to identify the VLAN Configuration mode applied on a device in SU mode.
To view active VLAN applied on the device in SU mode, navigate to MONITOR > Active VLAN. The Active VLAN page
appears:
Figure 7-14 Active VLAN
The Active VLAN Config parameter helps you to identify the current VLAN configuration applied on the device in SU mode.
• Local: VLAN configuration is done locally from the device.
• Remote: VLAN configuration is done through RADIUS Server.
This page also displays the VLAN parameters and their values that are configured either locally or remotely.
To view active VLAN Ethernet Configuration, navigate to
MONITOR
>
Active VLAN > Ethernet
. The
Active VLAN
Ethernet Configuration page appears:
Figure 7-15 Active VLAN Ethernet Configuration
This page displays the VLAN Ethernet parameters and their values that are configured either locally or remotely.
Tsunami® 8100 Series - Software Management Guide 186