Manualshelf

User's Manual

ManualsBrandsProxim Wireless ManualsElectronicsTsunami 8000 Point-to-Point and Point-to-multipoint Product
181182183184185186187188189190
Monitor
Parameter Description
Remote Antenna Port Indicates the status of the remote end antenna ports. The antenna ports status is same as
Info explained in Local Antenna Port Info.
Remote Signal (dBm) Represents the signal level with which the device at the remote end receives frames,
through wireless medium.
Remote Noise (dBm) Represents the noise measured at the remote end antenna ports.
Remote SNR (dB) Represents the SNR measured by the receiver at the remote end and is based on the
Remote Signal and Remote Noise.
Current Tx Power Applicable only when ATPC is enabled on the device.
(dBm)
• TPC: Displays the TPC value currently applied by the device to adjust the transmit
power radiated by the radio antenna.
• EIRP: Displays the current EIRP that a radio antenna radiates (after applying the TPC).
• Power: Displays the current transmit power radiated by the radio (after applying the
TPC).
Click Refresh to view updated link statistics.
To view detailed SU/End Point B Link statistics, click Details icon in the SU/End Point B Link Statistics screen. The
following screen appears depending on your device:
Tsunami® 8100 Series - Software Management Guide 182