User's Manual

Management
Figure 6-18 Logs
• Event Log Priority: By default, the priority is set to Notice. You can configure the event log priority as one of the
following:
- Emergency
- Alert
- Critical
- Error
- Warning
- Notice
- Info
- Debug
Please note that the priorities are listed in the order of their severity, where Emergency takes the highest severity and
Debug the lowest. When the log priority is configured as high, all the logs with low priority are also logged. For example,
if Event Log Priority is set to Notice, then the device will log all logs with priorities Notice, Warning, Error, Critical, Alert
and Emergency.
• Syslog Status: By default, Syslog Status is enabled and default priority is Critical. If desired, you can choose to
disable.
• Syslog Priority: Configuration is same as Event Log Priority.
• After configuring the required parameters, click OK and then COMMIT.
6.3.4.1 Configure a Remote Syslog host
To forward the syslog messages to a remote syslog host, do the following:
1. Click Add in the Syslog Host Table screen. The Syslog Host Table Add Row screen appears:
Tsunami® 8100 Series - Software Management Guide 166