User's Manual

Management
• Enter the name of the Binary file (including the file extension) that has to be downloaded onto the device in the
File Name box.
3. To update the device with Text Based Configuration files, select Text Based Config.
• Enter the TFTP server IP Address in the Server IP Address box.
• Enter the name of the Text Based file (including the file extension) that has to be downloaded onto the device in
the File Name box.
Figure 6-9 Upgrade Text Based Configuration via TFTP
4. If you are updating the device with Binary Configuration file then click Update and then reboot the device or
alternatively click Update & Reboot.
5. If you are updating the device with Text Based Configuration file then
• Click Update to copy the text config file onto the device and then click Load for updating the device with text
config file.
• Alternatively, you can perform both update and load operation in one single step, by clicking Update & Load.
• For the changes to take effect, click COMMIT and then REBOOT.
: It is recommended not to navigate away from the upgrade screen, while the update is in progress.
6.2.5 Retrieve From Device
The Retrieve From Device tab allows you to retrieve logs and config files from the device either through HTTP or TFTP.
6.2.5.1 Retrieve from Device via HTTP
To retrieve files from the device by using HTTP, do the following:
1. Navigate to MANAGEMENT > File Management > Retrieve from Device > HTTP.
Tsunami® 8100 Series - Software Management Guide 156