User's Manual

Management
Figure 6-7 Upgrade Configuration - HTTP
2. In the HTTP screen, click Browse to locate the configuration file. Select Flashcfg.cfg for Binary Configuration file and
PXM-TBC.xml for Text Based Configuration file. Make sure that the file name does not contain any space or special
characters.
3. If you are updating the device with Binary Configuration file then click Update and then reboot the device.
4. If you are updating the device with Text Based Configuration file then,
a. Click Update to update the device with the config file and then click Load for loading the config file onto the
device. Alternatively, you can perform both update and load operation in one single step, by clicking Update
& Load.
b. For the changes to take effect, click COMMIT and then REBOOT.
6.2.4.2 Upgrade Configuration via TFTP
To upgrade the configuration files by using TFTP Server, do the following:
1. Navigate to MANAGEMENT > File Management > Update Configuration > TFTP.
Figure 6-8 Upgrade Binary Configuration via TFTP
2. You can update the device with two configuration files: Binary and Text Based. To update the device with Binary
Configuration file, select Binary Config.
• Enter the TFTP server IP Address in the Server IP Address box.
Tsunami® 8100 Series - Software Management Guide 155