User's Manual

Management
3. Click Update .
4. Once the update successfully completes, reboot the device.
6.2.3.2 Upgrade Firmware via TFTP
To upgrade the firmware via TFTP Server, do the following:
1. Navigate to MANAGEMENT > File Management > Upgrade Firmware > TFTP.
Figure 6-6 Upgrade Firmware - TFTP
2. Enter the TFTP Server IP Address in the Server IP Address box.
3. Enter the name of the latest firmware file (including the file extension) that has to be loaded onto the device in the
File Name box.
4. To update the device with new firmware, click either Update, or Update & Reboot. If you click Update, then you
should reboot the device after loading the files. Whereas, if you click Update and Reboot , the system will
automatically reboot the device after loading the files.
:
• After updating the device with the new firmware, reboot the device; Otherwise the device will continue to run
with the old firmware.
• It is recommended not to navigate away from the upgrade screen, while the update is in progress.
6.2.4 Upgrade Configuration
You can update the device with the latest configuration files either through HTTP or TFTP.
: Make sure the configuration file being loaded into the device is compatible. That is, the configuration file being
loaded should have been retrieved from a device of the same SKU.
6.2.4.1 Upgrade Configuration via HTTP
To upgrade the configuration files by using HTTP, do the following:
1. Navigate to MANAGEMENT > File Management > Upgrade Configuration > HTTP.
Tsunami® 8100 Series - Software Management Guide 154