User's Manual

Advanced Configuration
Parameter Description
MAC Address Represents the MAC address of the security gateway. This gateway routes the packets
transmitted by the SU to the different BSUs to which it belongs.
After configuring the required parameters, click OK and then COMMIT.
: Intra Cell Blocking is configurable only in Bridge mode. When you change the device from Bridge to Routing mode or
vice-versa, Intra-Cell Blocking stops or starts working only after a Reboot.
5.10.6.1 WORP Intra Cell Blocking Group Table
The user can form groups of SUs at the BSU which define the filtering criteria. All data to/from SUs belonging to the same group
are bridged. If a SU does not belong to any group, the BSU discards the data.
By default, a BSU supports 16 groups and each group can contain a maximum of 240 SUs. Please note that a single SU can be a
member of all the existing groups.
To view and configure the Intra Cell Blocking Group table, navigate to ADVANCED CONFIGURATION > Filtering> WORP Intra
Cell Blocking > Group Table. The WORP Intra Cell Blocking Group Table screen appears:
Figure 5-71 WORP Intra Cell Blocking Group Table
Tsunami® 8100 Series - Software Management Guide 123