User's Manual

Advanced Configuration
:
• RADIUS Configuration is applicable only when the VLAN Status is disabled on the SU.
• Local VLAN configuration takes priority over RADIUS Based VLAN configuration.
• When the link is down, the configuration received from the RADIUS is lost.
5.10 Filtering (Bridge Only)
Filtering is useful in controlling the amount of traffic exchanged between the wired and wireless networks. By using filtering
methods, we can restrict any unauthorized packets from accessing the network. Filtering is available only in bridge mode.
The various filtering mechanisms supported by the device are as follows:
• Protocol Filter
• Static MAC Address Filter
• Advanced Filtering
• TCP/UDP Port Filter
• Storm Threshold Filter
Filters get activated only when they are globally enabled on the device. To apply/configure global filters on the device, navigate
to ADVANCED CONFIGURATION > Filtering. The Filtering screen appears.
Figure 5-60 Filtering
Tabulated below is the table which explains Filtering parameters and the method to configure the configurable parameter(s):
Parameter Description
Global Filter Flag By default, Global Filtering is disabled meaning which no filters are applied on the device.
To apply filters on the device, enable the Global Filter Flag.
Please note that if Global Filter Flag is not enabled on the device, then none of the filters
can be applied on the device.
Tsunami® 8100 Series - Software Management Guide 109