User Manual

INSTALLATION AND MAINTENANCE MANUAL
LYNX.sc E1 FAMILY
SPREAD SPECTRUM RADIOS
OCTOBER 1998
PAGE 4-22 SECTION 5: TROUBLESHOOTING
Figure 4-1: Back-to-Back Test Configuration
(When using a BER tester, initiate loopback on connected LYNX.sc and select external test mode
as described in Section 3.12.2).
The LYNX.sc radios will be damaged if appropriate attenuation
is not supplied between radios. You must provide a minimum of
40 dB and no more than 80 dB attenuation between the two
radios.
LYNX.sc
LYNX.sc