User's Manual

Appendix B – Using “Help” in Text Terminal
xxx\>?
- ? : print help...
- clear : clear counters (?)
- delayed : [x] [cmd] run cmd after x seconds, result in "show hist del"
- enable : enable setting
- ping : [xx.xx.xx.xx] ping to ip
- quit : quit & logout
- show : system status & config & counters (?)
- telnet : [xx.xx.xx.xx] telnet to ip
ok
xxx\>enable
ok
xxx\#?
- ? : print help...
- clear : clear counters (?)
- delayed : [x] [cmd] run cmd after x seconds, result in "show hist del"
- enable : enable setting
- exit : exit from enable mode
- kill : [xxx] kill user with xxx pid
- ping : [xx.xx.xx.xx] ping to ip
- quit : quit & logout
- reset : resetting device (?)
- run : [w0-3/fd/auto/noauto] run config, enable autorun
- set : settings (?)
- show : system status & config & counters (?)
- telnet : [xx.xx.xx.xx] telnet to ip
- update : manage files, usb/ftp update (?)
- write : [w0-3] write configuration
ok
xxx\#clear ?
- atu : clear atu table
- ber : clear ber counters
- count : clear mux counters
- history : clear history logs (?)
- lancount : clear lan counters
ok
xxx|#clear history ?
- count : clear rfi counter err log
- delayed : clear delayed cmd log
- alarm : clear alarm log
- plog : clear periodical log
ok
Tsunami™ GX800 Installation and Management Guide 73