User's Manual
Table Of Contents
- Chapter 1 - Introduction
- Chapter 2 – Hardware Overview
- Chapter 3 – Installation and Initialization
- Chapter 4 - Commissioning
- Introduction
- Access Rights
- Restore Defaults
- Configure, Manage and Monitor using Web Browser
- General Screen
- IP Address Setup
- Dual License - Design Type Setup
- Frequency, Modulation and ATPC Setup
- Ethernet Advanced Configuration
- Data Rate Settings for Connected User Interfaces
- Save Configured Parameters
- BER Test – GX800 Link and User Lines Verification
- Analysis of Interference in GX800 link
- Firmware Upgrade, License Upgrade
- Alarms
- SNMP Settings
- IP Management
- Chapter 5 – Troubleshooting
- Chapter 6 - Technical Parameters
- Chapter 7 - Appendix
Grounding Kit for IDU (2 Qty)
Quick Installation Guide
Please verify that you have received all the parts in the shipment, prior to the installation.
Tsunami™ GX800 Wireless Radio System
The Tsunami™ GX800 product has an extremely small foot print and comes in a split-mount
design, which includes a Compact Indoor Unit (IDU) and an Outdoor Unit (ODU).
Indoor Unit (IDU)
The Indoor Unit (IDU) act as a Data Multiplexer and at the same time as the Digital Modem
(DSP) of the whole system. The core feature of the IDU is the DSP module, which generates a
signal for the intermediate frequency output to the Outdoor Unit (ODU) and processes
intermediate frequency input from the ODU.
Proxim's GX800 IDU is shown below.
The IDU consists of the following components:
Components Description
10/100/1000 Gigabit
Ethernet Port
User traffic interface with Gigabit Ethernet port for data
payload
Tsunami™ GX800 Installation and Management Guide 6
Figure 1: Front Panel View of the IDU