User's Manual

1. Fix the small L-shaped clamps (supplied with the product package) to any one side of the
IDUs with the provided screws and washers.
2. Connect both the IDUs with the Dual IDU Mount kit (not supplied with the product
package)
3. Next, fix the connected IDUs to the rack.
!! CAUTION !! Do not forget to ground the IDU to the rack cabinet with the help of Grounding kit
(supplied with the product package).
ODU Installation
!! Note !! Prior to the installation, carefully remove the cap present on the ODU without
tampering the protective film present inside it.
Direct Mount
In the direct mount, the ODU is fitted to the antenna directly with an ODU interface and secured
using clips.
!! ATTENTION !! Always fasten 2 latches which are adjacent to one another at the same
time.
Setting the Polarization
The polarization depends on the ODU position. An arrow symbol on the ODU identifies the
polarization.
Tsunami™ GX800 Installation and Management Guide 11
Figure 5: Direct ODU Mount
Figure 4: Dual IDUs Mounting