User's Manual
Table Of Contents
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Base Station Antenna
- 10 dBi Omni-Directional Base Station Antenna
- 12 dBi Directional Wide Angle Antenna
- 24 dBi Directional Parabolic Grid Antenna
- Certified Outdoor Solutions
- Support & Warranty
- Index
- List of Figures
- List of Tables
ORiNOCO Outdoor Antenna Installation Guide F-1
24 dBi Directional
Parabolic Grid Antenna
Hardware Specifications
The Lucent Technologies 24 dBi Directional Parabolic Grid Antenna is a
broadband antenna for the 2.4 GHz frequency band.
The grid-type antenna that allows for either horizontal or vertical mounting on a
antenna mast with an outside diameter of up to 51 mm (2 in). For detailed
specifications see Table F-1 on page F-5.
This antenna is typically used in combination with ORiNOCO Outdoor Routers in
Remote slave Mode.
!
WARNING:
The 24 dBi Directional Parabolic Grid Antenna is not allowed in
countries that adhere to the ETSI radio regulations, France and Japan.
In countries that adhere to the FCC regulations, use of this antenna is
only allowed when operated with specific ORiNOCO radio channels that
can be set at the ORiNOCO/Outdoor Router. Appendix G “Certified
Outdoor Solutions” describes which channels are allowed or not.
Prior to purchasing or installing the 24 dBi Directional Parabolic Grid
Antenna, please consult “Certified Outdoor Solutions” on page G-1 for
more information.