User's Manual
Table Of Contents
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Base Station Antenna
- 10 dBi Omni-Directional Base Station Antenna
- 12 dBi Directional Wide Angle Antenna
- 24 dBi Directional Parabolic Grid Antenna
- Certified Outdoor Solutions
- Support & Warranty
- Index
- List of Figures
- List of Tables
ORiNOCO Outdoor Antenna Installation Guide 1-1
Welcome
About This Guide
This ORiNOCO Outdoor Antenna Installation Guide explains how to install and
set-up an outdoor antenna installation based on ORiNOCO PC Cards that will
be used in combination with:
■ ORiNOCO Outdoor Router products
1
■ ORiNOCO Client products
There is also a chapter about verifying the wireless link quality and correcting
problems that might arise during installation or operation.
This guide does not explain how to erect antenna masts, or how to install a
safety grounding system. These are pre-requisites that must be in place before
the directional antenna is installed.
Who Should Use This Guide
The installation of Outdoor Antenna Links requires technical expertise. At the
very least, you should be able to:
■ Install and configure the network components, such as the Outdoor Router
and the ORiNOCO LAN administrator’s station.
■ Understand or have a working knowledge of the installation procedures for
network operating systems under Microsoft Windows 95/98 and/or Microsoft
Windows NT.
■ Mount the outdoor antenna and surge arrester. Lucent Technologies
recommends that the installation is performed by a qualified antenna
installation service.
1 Formerly also referred to as WavePOINT-II PTP, WaveACCESS Link WP-II or WaveCAMPUS.