User's Manual
Table Of Contents
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Base Station Antenna
- 10 dBi Omni-Directional Base Station Antenna
- 12 dBi Directional Wide Angle Antenna
- 24 dBi Directional Parabolic Grid Antenna
- Certified Outdoor Solutions
- Support & Warranty
- Index
- List of Figures
- List of Tables
14 dBi Directional Antenna
General Description
B-2 ORiNOCO Outdoor Antenna Installation Guide
Mounting to a Mast
To mount the antenna to a mast proceed as follows:
1. Verify if you have all the items listed below:
■ The ORiNOCO 2.4 GHz antenna
■ The 2 U-bolts and bolt heads provided
■ The 4 flat washers and 4 nuts provided
■ A socket wrench to tighten the nuts
2. Note the arrows on the mounting plate.
3. Mount the antenna with the arrows pointing up.
4. Attach the antenna to the mast as pictured in Figure B-1 on page B-2, using
the U-bolts and bolt heads, the Metal Backing Plate and nuts.
5. Proceed with “Connecting the Antenna Cable” on page 4-6.
!
CAUTION:
Always place flat washers between heads (or nuts) and the plastic
mounting plate. Avoid overtightening the nuts and screws to prevent
damage to the mounting plate.
Figure B-1 Mounting the 14 dBi Antenna to a Mast