User's Manual

The Antenna Cabling System
ORiNOCO Cable Assembly
A-6 ORiNOCO Outdoor Antenna Installation Guide
ORiNOCO Cable Assembly
The ORiNOCO Cable Assembly is the Lucent Technologies proprietary cable to
connect ORiNOCO PC Cards to an outdoor antenna system.
On the end that is connected to the ORiNOCO card, the cable assembly has the
Lucent Technologies proprietary connector.
The N-Type connector at the opposite end will match the polarity of the N-
connectors of the other outdoor antenna cabling system components.
Table A-3 Specifications Cable Assembly
!
CAUTION:
The Lucent proprietary connector that fits into the ORiNOCO PC Card
has been designed for “fixed installations” only, allowing for occasionally
disconnecting and reconnecting the outdoor antenna cabling system
when needed. Repeatedly (dis)connecting the Cable Assembly, will
wear out the connectors and void Warranty of the Cable Assembly
product.
Mechanical
Length 50 cm (19.5 in.)
Connectors
1
1 See also “Selecting the Correct Connector-Type” on page A-2
■ Proprietary ORiNOCO PC Card Connector
■ Standard-N (Male)
Operating Temperature - 40°C to +85°C
Electrical
Frequency Range 800-2500 MHz
Insertion Loss 0.9 dB