User's Manual
Table Of Contents
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Base Station Antenna
- 10 dBi Omni-Directional Base Station Antenna
- 12 dBi Directional Wide Angle Antenna
- 24 dBi Directional Parabolic Grid Antenna
- Certified Outdoor Solutions
- Support & Warranty
- Index
- List of Figures
- List of Tables
The Antenna Cabling System
The Outdoor Cabling Components
ORiNOCO Outdoor Antenna Installation Guide A-5
3. Finally connect the ORiNOCO Surge Arrester to the grounding system.
Before you proceed, verify that each of the items is properly grounded, and that
the ground will not interrupted when disconnecting one of the antenna system
components.
Check with a qualified electrician if you are in doubt as to whether the surge
arrester, and cable connectors are properly grounded.
Only after you have verified that each of the items is properly grounded, replace
the surge arrester and re-connect the cables in exactly the reverse order of the
previous steps.