User's Manual
Table Of Contents
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Base Station Antenna
- 10 dBi Omni-Directional Base Station Antenna
- 12 dBi Directional Wide Angle Antenna
- 24 dBi Directional Parabolic Grid Antenna
- Certified Outdoor Solutions
- Support & Warranty
- Index
- List of Figures
- List of Tables
The Antenna Cabling System
The Outdoor Cabling Components
ORiNOCO Outdoor Antenna Installation Guide A-3
Table A-1 Standard N-Type Connector Diagram
NOTE:
Previously marketed ORiNOCO outdoor antenna systems in FCC
regulated countries (e.g. USA & Canada) were shipped with a different
cabling system, identified by Reverse Polarity-N connectors (pictured in
Table A-2 on page A-4).
If you are looking for replacement parts, or wish to extend a previously
installed Reverse Polarity-N cabling system, please consult your
Authorized ORiNOCO Reseller. You can use Table A-2 to:
■ Determine the type of cabling system currently installed.
■ Determine what type of spare part or converter you will need if you
intend to upgrade or replace a previously installed outdoor cabling
system.