User's Manual
Table Of Contents
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Base Station Antenna
- 10 dBi Omni-Directional Base Station Antenna
- 12 dBi Directional Wide Angle Antenna
- 24 dBi Directional Parabolic Grid Antenna
- Certified Outdoor Solutions
- Support & Warranty
- Index
- List of Figures
- List of Tables
Preparing for Installation
Before Climbing the Roof...
ORiNOCO Outdoor Antenna Installation Guide 2-15
Before Climbing the Roof...
Before you start installation check whether you have all hardware components
required to setup an outdoor antenna link. For each side of a wireless outdoor
antenna link you will need:
1. One Outdoor Router or Outdoor Router Client.
2. One ORiNOCO PC Card.
3. One ORiNOCO Cable Assembly (to connect item 2 to item 4).
4. One ORiNOCO Surge Arrester.
5. One Lucent Technologies low-loss antenna cable.
6. One ORiNOCO Outdoor Antenna
7. Weather-proofing electrical tape.
If any of the items is missing, or if there are signs of shipment damage, please
inform your supplier.