User's Manual

Preparing for Installation
Overview of the Indoor Installation
2-4 ORiNOCO Outdoor Antenna Installation Guide
Outdoor Router Client
To setup a wireless connection with the Outdoor Router Client, you will need:
■ One PC Card,
■ One Outdoor Router Client License Kit, and
■ One antenna cabling system.
Figure 2-2 shows an overview of the hardware setup for this indoor installation.
Figure 2-2 Overview Indoor Installation Outdoor Router Client
On each end of the wireless link you will need the following items as pictured in
Figure 2-2:
a. The ORiNOCO PC Card (see “Selecting the Right Card & Cables” on
page G-3).
b. The Cable Assembly to connect the ORiNOCO PC Card (A) to the Surge
Arrester.
c. A surge arrester to protect your sensitive ORiNOCO equipment from static
discharge and transients that may occur to your antenna.
d. A low-loss antenna cable to connect the indoor installation to the outdoor
antenna.
e. A grounding systems as described in “Grounding System” on page 2-12.
!
WARNING:
The ORiNOCO Outdoor Router, the ORiNOCO Surge Arrester and the
antenna mast must be connected to the same grounding system.