User's Manual
Table Of Contents
- Welcome
- Preparing for Installation
- Determine Range & Clearance
- Installing the Antenna
- The Antenna Cabling System
- 14 dBi Directional Antenna
- 7 dBi Omni-Directional Base Station Antenna
- 10 dBi Omni-Directional Base Station Antenna
- 12 dBi Directional Wide Angle Antenna
- 24 dBi Directional Parabolic Grid Antenna
- Certified Outdoor Solutions
- Support & Warranty
- Index
- List of Figures
- List of Tables
Preparing for Installation
Overview of the Indoor Installation
2-2 ORiNOCO Outdoor Antenna Installation Guide
Overview of the Indoor Installation
The indoor installation of the link will consist of the following components:
■ Outdoor Router Hardware, and
■ A Cable System.
Outdoor Router Hardware
There are two types of hardware installations to setup a wireless connection:
■ The Outdoor Router, and
■ The Outdoor Router Client.
Outdoor Router
To setup a point-to-point wireless connection between two Outdoor Routers, you
will need:
■ Two ORiNOCO Outdoor Routers with PC Card, and
■ Two antenna cable systems (see Appendix Appendix A “The Antenna
Cabling System”), and
■ Two outdoor antenna’s.
Figure 2-1 shows an overview of the hardware setup for this indoor installation.
Figure 2-1 Overview Indoor Installation of the Outdoor Router