User's Manual
Tsunami MP.11and MP.11a Installation and Management
4) SNMP
Click the Configure button and the SNMP tab to set passwords, set trap host IP addresses, and limit
access to the MP.11/a management interface. You can enable: All Interfaces, Only Ethernet, Only
Slot A, or None.
Trap Groups
You can enable or disable different types of traps in the system. By default, all traps are enabled.
Trap Host Table
This table shows the SNMP management stations to which the MP.11/a sends system traps.
Chapter 5. Web Interface 55
CPN 65755 Issue Date: August 2003