User's Manual

Tsunami MP.11and MP.11a Installation and Management
You can enter the following details:
System Name
This is the system name for easy identification of the MP.11/a. Use the system name of this Base
Station to configure the Base Station System Name parameter on a satellite if you want the
satellite to register only with this Base Station. If the Base Station System Name is left blank on
the satellite, it can register with any Base Station that has a matching Network Name and Network
Secret.
Country (Tsunami MP.11a units only)
This field is available on Tsunami MP.11a units only; when you choose a country with a regulatory
domain that requires Dynamic Frequency Selection (DFS) or Transmit Power Control (TPC), they
are enabled automatically. The Country selection pre-selects and displays only the allowed
frequencies for that country. Click the Configure button, the Interfaces tab, and the Wireless sub-
tab to see the channel/frequency list.
MP.11a kits sold in the United States are pre-configured to scan and display only the outdoor
frequencies permitted by the FCC. No other Country selections, channels, or frequencies may be
configured. MP.11a kits sold outside of the United States and Canada support the selection of a
Country by the professional installer.
See “Dynamic Frequency Selection” on page 68 and the Transmit Power Control field under
“Interface Configuration” (page 34) and for more information. The Country selections are as
follows::
Location
This field can be used to describe the location of the MP.11a, for example “Main Lobby.”
Chapter 5. Web Interface 45
CPN 65755 Issue Date: August 2003