User's Manual

Tsunami MP.11and MP.11a Installation and Management
CONFIGURE
Use the Configure section to change the settings of the MP.11/a. There are ten tabs in this section.
1. System below
2. Network on page 46
3. Interfaces on page 51
4. SNMP on page 55
5. RIP on page 56
6. Telnet on page 58
7. Serial on page 59
8. HTTP on page 59
9. Security on page 60
10. Filtering on page 62
1) System
The System Configuration page lets you change the MP.11/a’s System Name, Location, and so on.
These details help you to distinguish the MP.11/a from other routers and let you know whom to contact
in case you experience problems.
Click the Configure button and the System tab; the following window is displayed.
In this section, you can enter or view the basic system information. These settings do not influence the
operation of the MP.11/a, with the exception of Mode of Operation. Mode of Operation sets the
MP.11 as bridge (layer 2) or as router (layer 3).
Chapter 5. Web Interface 44
CPN 65755 Issue Date: August 2003