Installation Manual
Table Of Contents
- COPYRIGHT
- TRADEMARKS
- REGULATORY INFORMATION
- Contents
- About This Book
- Chapter 1. Preparing for Installation
- Chapter 2. Determining Range and Clearance
- Chapter 3. Installing the Antenna
- Appendix A. Outdoor Antenna Equipment
- Appendix B. Antenna Cabling System
- Appendix C. Recommended Antennas
- Appendix D. Certified Outdoor Solutions
- Appendix E. Channel Frequencies
- Support and Warranty
Tsunami MP.11a Antenna Installation Guide
Specifications
Electrical
Frequency Range 5725 - 5875 MHz
Nominal Impedance 50 ohms
Gain 23 dBi
Front-to-Back Ratio 40 dB
HPBW/vertical 9 degrees
HPBW/horizontal 9 degrees
Cross Polarization 25 dB
Power handling 20 W (cw)
Connector Standard N female
VSWR 1.5: 1 maximum
Environmental and Mechanical
Wind Survival (per EIA-222-F at
100’ height)
216 km/hr
Temperature range -40 to +80 degrees C
Humidity 95% @ 25 degrees C
Lightning protection DC ground
Size 360 x 360 x 16 mm
Weight 1.6 kgw
Radome material ABS, UV resistant
Housing material Powder-coating tron
Radome color white
Appendix C. Recommended Antennas 46
CPN 65756 Issue Date: 01 August 2003