Installation Manual
Table Of Contents
- COPYRIGHT
- TRADEMARKS
- REGULATORY INFORMATION
- Contents
- About This Book
- Chapter 1. Preparing for Installation
- Chapter 2. Determining Range and Clearance
- Chapter 3. Installing the Antenna
- Appendix A. Outdoor Antenna Equipment
- Appendix B. Antenna Cabling System
- Appendix C. Recommended Antennas
- Appendix D. Certified Outdoor Solutions
- Appendix E. Channel Frequencies
- Support and Warranty
Tsunami MP.11a Antenna Installation Guide
Table 3. Output Power Table for FCC
Frequency Band Channels 54 Mbps 48 Mbps 36 Mbps 6-24 Mbps
5.25 – 5.35 GHz 52, 56, 60 14.5 15.5 17.5* 18.5*
5.25 – 5.35 GHz 64 12.5 12.5 12.5 12.5
5.745 – 5.850 GHz 149, 153 13.5 15.5 17.5 18.5
5.745 – 5.850 GHz 157, 161 13.5 15.5 17.5 17.5
5.745 – 5.850 GHz 165 12.5 15.5 17.5 17.5
* 17.4dBm is the FCC certified peak output power of Tsunami MP.11a product at 5.25-5.35GHz band
** 20.8dBm is the FCC certified peak output power of Tsunami MP.11a product at 5.725-5.850 GHz band
These power levels are the levels at the antenna connector of the MP.11, so where the MP.11 has a higher
output power than certified, the TPC needs to be used to reduce the output power.
Chapter 2. Determining Range and Clearance 23
CPN 65756 Issue Date: 01 August 2003