User's Manual

ManualsBrandsProxim Wireless ManualsElectronics900 MHz Wireless Outdoor Router

Tsunami MP.11 Model 954-R

Features and Specifications

PN 73865 1

Introduction

The Tsunami MP.11 Model 954-R Base Station and Subscriber Units (BSUs and SUs) are flexible wireless outdoor

routers that let you design solutions for point-to-point links and point-to-multipoint networks. The 954-R operates in the

900 MHz band.

The 954-R is part of the Tsunami MP.11 product family, which is comprised of several additional products, including:

• The 5054 Base Station (BSU) and the 5054 Subscriber Unit (SU) for indoor installation

• The 2454-R, 5054-R, and 4954-R Base Station and Subscriber Station Units for outdoor installation

• The 5054 Base Station (BSU), the 5054 Subscriber Unit (SU), and the 5012-SUI Subscriber Unit for indoor installation

• The 5012-SUR Subscriber Unit for outdoor installation

Key Features

Key features of the MP.11 product family include:

• The use of a highly optimized protocol for outdoor applications

• Routing and bridging capability

• Asymmetric bandwidth management

• Management through a Web Interface, a Command Line Interface (CLI), or Simple Network Management Protocol

(SNMP)

• Software and configuration upgrade through file transfer (TFTP)

• Outdoor placement, close to the antenna, for significantly improved range and ease of installation

• VLAN support

Summary of content (7 pages)

PAGE 1
Tsunami MP.11 Model 954-R Features and Specifications Introduction The Tsunami MP.11 Model 954-R Base Station and Subscriber Units (BSUs and SUs) are flexible wireless outdoor routers that let you design solutions for point-to-point links and point-to-multipoint networks. The 954-R operates in the 900 MHz band. The 954-R is part of the Tsunami MP.
PAGE 2
Tsunami MP.11 Model 954-R Features and Specifications Technical Specifications Part Numbers Radio Units Base Station Unit Part Number 954-BSUR-US Description Tsunami MP.11 Model 954-R Base Station Unit with Type-N Connector – US/CAN Subscriber Unit Part Number 954-SUA-US Description Tsunami MP.
PAGE 3
Tsunami MP.
PAGE 4
Tsunami MP.11 Model 954-R Features and Specifications Receive Sensitivity NOTE: BER=10-6 • Rx Sensitivity values will have a tolerance of +/- 2 dB Modulation Rate 64QAM ¾ -70 dBm @ 54 Mbps 64QAM ½ -73 dBm @ 48 Mbps 16QAM ¾ -79 dBm @ 36 Mbps 16QAM ½ -82 dBm @ 24 Mbps QPSK ¾ -86 dBm @ 18 Mbps QPSK ½ -87 dBm @ 12 Mbps BPSK ¾ -89 dBm @ 9 Mbps BPSK ½ -90 dBm @ 6 Mbps Maximum Throughput NOTE: Actual throughput performance in the field may vary.
PAGE 5
Tsunami MP.11 Model 954-R Features and Specifications Transmit Power Settings • Output Power Attenuation: 0 - 18 dB, in 1 dB steps • Output Power Values will have a tolerance of +/- 1 dB Frequency 902-928 MHz 6-24 Mbps @ 20 MHz 36 Mbps @ 20 MHz 48 Mbps @ 20 MHz 54 Mbps @ 20 MHz 16QAM ½; QPSK ¾; 16QAM ¾ 64QAM ½ 64QAM ¾ QPSK ½; BPSK ¾; BPSK ½ 28 dBm 26 dBm 24 dBm 23 dBm Range Information Frequency 902 - 928 MHz 54 Mbps 4 mi. 36 Mbps 8 mi. 6 Mbps 12 mi.
PAGE 6
Tsunami MP.11 Model 954-R Features and Specifications Category Specification Filtering • • • • • • Ethernet protocol (Ethertype) Static MAC Storm threshold IP address Broadcast protocol Intra Cell Blocking (Configured on BSU) Services • • • • • DHCP Server (RFC 2131) DHCP Client (RFC 2131) Bi-Directional Bandwidth Control NAT (RFC 3022) (Configured on SU) DHCP Relay (RFC 2131) (Configured on SU) VLAN • 802.
PAGE 7
Tsunami MP.11 Model 954-R Features and Specifications Power Requirements Category Power-over-Ethernet Specification • Custom Power over Ethernet (802.3af compatible) • Input: Voltage 110 to 250 VAC (47-63Hz) • Output: 48V @ 420mA MAX (injected into the Cat-5 Cable) Outdoor Radio Unit • Power Consumption: 7.5W typical. Up to 20 Watts across full operating temperature range.